Paper FIll

The Evaporative Cooling Pad or paper fill is made of cellulose paper and is engineered from cross-sectional, specially treated flute media capable of absorbing and retaining water to provide the maximum cooling efficiencies. The cellulose media is treated with stiffening and wetting agents to provide the cooling without any water carryover. The pads are designed for tropical and subtropical countries, ensures greatest performance during summer seasons.

Mixed Esters of Cellulose (MCE) or Cellulose Acetate (CA) is best for microbiology and environment monitoring test. Contrasting grid lines facilitate counting colonies on the filter surface and are tested to assure freedom from grid line inhibition. The Membrane Solutions MCE membranes are also tested for freedom from grid line inhibition and optimal color reactions on appropriate test media.

The Cellulose Pad is cross corrugated coated with anti rot, rigidify & wetting resins. The 150 VAPUR+ Pad are made for maximum efficiency, at minimum pressure drop.The pad media is treated with anti-rot and rigidify resins. The media is cross-corrugated to maximize the mixing of air and water. Saturation efficiency ranging from 50 to 98% can be achieved depending upon air velocity and depth of the cooling pad.

Air flows horizontally, while the re-circulating water flows vertically, through the pad. The water is collected at bottom of the pad and is re-circulated, again by a pump through the unique gutter system made of G. I. Sheet.