Dwyer USA Model 2300-0 Magnehelic Gage Range 0.25-0-0.25 Inch WC

Product Description

Bezel Provides Flange For Flush Mounting in Panel. Clear Plastic Face is Highly Resistant to Breakage.Provides Undistorted Viewing of Pointer and Scale.

Dwyer 2300-0 Differential Pressure Gage

Dwyer 2300-0 Differential Pressure Gage, Range 0.25-0-0.25" w.c. (inches of water), minor divisions .01, calibrated for vertical scale position

Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

What's included with the Dwyer 2300-0

• Dwyer 2300-0 Magnehelic Differential Pressure Gauge (0.25-0-0.25"w.c.), Vertical Scale 

Ask a question about Dwyer 2300-0 Magnehelic Differential Pressure Gauge (0.25-0-0.25"w.c.), Vertical Scale